sonopto.

Antalya Hakimevi Meeting Hall LED Screen Installation

Client:
Antalya Hakimevi
Location:
Antalya
Date:
11/11/2026
Antalya Hakimevi toplantı salonunda devreye alınmış 7,2 x 4,05 metrelik LED ekran, tam ekran doğa görüntüsü oynatıyor.

For years a projection screen was the only option in a meeting hall. The screen came down, the lights went off, and the back rows struggled to read. At Antalya Hakimevi, a 7.2 x 4.05 metre LED screen has taken the place of the projection screen: a single surface that makes its own light and stays readable with the hall lights on.

What We Did

  • Preparation of the mounting surface and installation of the support structure
  • Installation of 144 cabinets in a 12 x 12 grid, aligned one by one
  • Fitting of the Full Flip-Chip COB modules
  • Signal and power cabling, controller connections
  • Module, alignment and colour checks with line and full field test patterns
  • Commissioning and user briefing

About the Project

The screen is 12 cabinets wide and 12 cabinets tall. At 480 x 270 pixels per cabinet the total resolution reaches 5760 x 3240, which is the pixel count of nine Full HD screens gathered on a single surface. With a pixel pitch of 1.25 millimetres the pixel structure stays invisible even from the front row.

The installation was recorded from the moment the boxes entered the hall to the first image on the wall. Once the cabinets were in place the black COB modules covered the surface, and test patterns then confirmed that every module was working and matched its neighbours in colour temperature.

Why Flip-Chip COB?

In Flip-Chip COB modules the LED chips sit under a protective resin layer. The surface stands up to knocks, dust and cleaning better than classic SMD modules, and in a room where people walk right up to the screen that difference shows over time.

From site survey to commissioning, we are on site for your LED screen projects. Get in touch with us.

Kurulum öncesi salon: LED kabinetlerin taşıma kutuları istiflenmiş, sağda makaslı platform duruyor.12 x 12 ızgara halinde monte edilmiş 144 LED kabinetin arka yüzü; kabinetler henüz modülsüz.Siyah Full Flip-Chip COB modüller kabinet ızgarasının üzerine takılırken ekranın yarısı kaplanmış durumda.Tam alan yeşil test deseni yayınlanırken modül ve hizalama kontrolü yapılıyor.Ekranda ilk içerik görüntüleniyor; salonda hala kurulum platformu ve sandalyeler duruyor.
Müşteri
Antalya Hakimevi
Lokasyon
Antalya
Sektör
Kamu kurumu
Ekran Ölçüsü
7,2 x 4,05 m
Piksel Aralığı
P1.25
Çözünürlük
5760 x 3240 piksel
Kabinet
144 adet, 12 x 12 ızgara
Modül
Full Flip-Chip COB
Kapsam
Taşıyıcı sistem montajı, 144 kabinetin hizalanarak montajı, COB modül montajı, sinyal ve enerji kablolaması, test desenleriyle kontrol ve devreye alma
Tarih
Kasım 2026

Frequently Asked Questions

Can the projection screen in a meeting hall be replaced with an LED screen?+

Yes. The wall area freed up when the screen and projector come down is usually already suitable for the LED screen's support structure. In this hall a 7.2 x 4.05 metre LED screen took the place of the projection screen, and the image stays readable with the hall lights on.

How long does an LED screen on this scale take to install?+

At Antalya Hakimevi the 144 cabinet screen was finished in three days, from the boxes entering the hall to the first image. The time depends on the number of cabinets, the state of the mounting surface and whether the power and signal infrastructure is ready.

What does pixel pitch mean and how is it chosen?+

Pixel pitch is the distance between two LEDs, so P1.25 means that distance is 1.25 millimetres. The smaller the pitch, the closer a viewer can stand. In meeting halls, where the front row sits a few metres from the screen, 1.25 millimetres or finer is the usual choice.

← Back to all references